Smartlight - Octane Fitness xRide xR6x Operation Manual

®

SMARTLIGHT

SMARTLIGHT at the top of the console communicates important information for your workout. On both the xR6x
and xR6xi, SMARTLIGHT functions primarily as an intensity meter, giving you visual affirmation as your resistance
level or speed increases or decreases.
On the xR6xi, SMARTLIGHT uses multiple colors to communicate additional information about your workout:
• Workout Booster selection and status. When no booster is selected, and between booster intervals,
SMARTLIGHT is an orange intensity meter. When a booster is first selected, the color changes to indicate
which booster is selected: XMode (green), GluteKicker (yellow) or ArmBlaster (blue). When a booster is active,
SMARTLIGHT blinks to indicate that a booster session is about to begin.
• Target Heart Rate "Zone meter". During heart-rate controlled programs, SMARTLIGHT is dark blue when
your target heart rate is 15 or more beats per minute (BPM) lower than your goal, changing to light blue
when your heart rate is 15 to 5 BPM less than your goal, and to green when you are within 5 BPM of your
target. SMARTLIGHT changes to yellow when your heart rate is more than 5 BPM above your goal, and to
red when you are 15 or more BPM above your goal. When your workout is over and it's time to cool down,
SMARTLIGHT is a slowly blinking dark blue. Follow these color indicators as they prompt you to adjust your
speed or intensity to keep your workout "in the zone".
-15 BPM
Dark Blue
SMARTLIGHT
-5 BPM
Light Blue Green
+5 BPM +15 BPM
Yellow Red
10