SHERCO 2013 SE 250i-R Shop Manual page 33

Checking the center crankcases:
•
Inspect the general condition of the
center crankcases for wear and cracks.
Replace the center crankcase if necessary.
•
Inspect the condition of all the bearings.
Replace the bearings if necessary.
•
Inspect the condition of the crankshaft
bearings.
Replace the crankshaft bearings if necessary.
•
To remove the bearings, install tool
number R464, heat the tool and the bearing.
•
Remove the bearing.
The radial play in the roller bearings must
be practically zero.
32/54