SHERCO 2013 SE 250i-R Shop Manual page 23

Replacing the cam chain:
•
Remove the camshafts (see the chapter
on the motor top end).
•
Remove the clutch cover (see the
chapter on « Right side » removing the clutch).
•
Remove the chain tensioner adjuster.
•
Remove the cam chain.
•
Inspect the cam chain (see « visually
inspecting the cam chain »).
•
Install the cam chain in the opposite
manner in which it was removed.
•
Reinstall the cam tensioner bolt and
tighten to the correct torque.
Torque the cam tensioner bolt to:
10Nm.
Côté Droit
22/54