SHERCO 2013 SE 250i-R Shop Manual page 41

40/54
Clean of injector body
- Clean the injector body with Net Carbu
- Make sure you clean perfectly the edge of the
mixture throttle on each side by opening it
completely
- Clean the injector
- In order to keep the air screw adjustment, screw it
completely and count the number of turns
- Remove the air screw, clean it and clean the
location.
- Replace the air screw with its initial adjustment.
Edge of the mixture throttle
Replace the injector body
- Put back all the parts together again, put some
connector grease inside the electrical connectors
(TPS plug, injector plug)
- Set the throttle cable
Air screw