Installing The Sbpd; Attaching The Sbpd To The Plasma Display - Smart Technologies Smart Board Plasma Display Installation Manual

Installing the SBPD

To install the prepared SBPD, you'll need to complete the following three tasks:
1. Attach the SBPD to the plasma display (pages 10–12).
2. Install security screws, if wanted (page 13).
3. Equip the SMART Pen Tray (page 13).
WARNING: For the procedures that follow, your plasma display must be securely mounted. Do
not attempt to install the overlay on a plasma display that is not fixed in a secure position.

Attaching the SBPD to the Plasma Display

1. With the assistance of another person, lift the prepared SBPD off the table, holding it firmly
by its four corners, and align it with the plasma display.
Proper Way to Lift the SBPD
SBPD Installation Guide
10