Motorola MC32N0 Integrator Manual page 65

Selecting this level of security significantly impairs the decoding ability of the scanner. If this level of
security is needed, try to improve the quality of the bar codes.
• Code39
- Length1 - Use to set decode lengths (default - 0). See
- Length2 - Use to set decode lengths 4 (default - 55). See
- Verify Check Digit - Enable this feature to check the integrity of all Code 39 symbols to verify that the data
complies with a specified check digit algorithm. The digital scanner decodes only those Code 39 symbols that
include a modulo 43 check digit. Enable this feature only if the Code 39 symbols contain a modulo 43 check
digit (default - disabled).
- Report Check Digit - Transmit Code 39 data with or without the check digit. A check in the checkbox
indicates to send Code 39 data with check digit (default - disabled).
- Full ASCII - Code 39 Full ASCII is a variant of Code 39 that pairs characters to encode the full ASCII
character set. To enable or disable Code 39 Full ASCII (default - disabled),
- Redundancy - Sets the reader to read the bar code twice before accepting data. A check in the checkbox
indicates that redundancy is enabled (default - disabled).
- Convert Code39 To Code32 - Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry.
Scan the appropriate bar code below to enable or disable converting Code 39 to Code 32 (default - disabled).
- Report Code32 Prefix - Scan the appropriate bar code to enable or disable adding the prefix character "A" to
all Code 32 bar codes (default - disabled).
- Security Level - Options: Security level 0, Security Level 1, Security Level 2 and Security Level 3 (default
- Security level 1).
• Interleaved 2 of 5
- Length1 - Use to set decode lengths (default - 14). See
- Length2 - Use to set decode lengths (default - 10). See
- Redundancy - Sets the reader to read the bar code twice before accepting data. A check in the checkbox
indicates that redundancy is enabled (default - enabled).
- Check Digit
+ No Check Digit - A check digit is not used. (default)
+ USS Check Digit - Select to check the integrity of all Interleaved 2 of 5 symbols to verify the data
complies with either the Uniform Symbology Specification (USS) check digit algorithm.
+ OPCC Check Digit - Select to check the integrity of all Interleaved 2 of 5 symbols to verify the data
complies with either the Optical Product Code Council (OPCC) check digit algorithm.
- Report Check Digit - Transmit Interleaved 2 of 5 data with or without the check digit. A check in the
checkbox indicates to send Interleaved 2 of 5 data with check digit (default - disabled).
- Convert ITF-14 To EAN13 - Convert 14-character Interleaved 2 of 5 bar codes to EAN-13, and transmit as
EAN-13. The Interleaved 2 of 5 bar code must be enabled and must have a leading zero and a valid EAN-13
check digit. A check in the checkbox indicates that the option is enabled (default - disabled).
- I2of5 Security Level - Options: I2of5 Security level 0, I2of5 Security Level 1, I2of5 Security Level 2 and
I2of5 Security Level 3 (default - I2of5 Security level 1).
• Composite AB
- UCC Link Mode
+ Link Flag ignored - 1D component is transmitted regardless of whether a 2D component is detected.
+ Always Linked - 1D and the 2D components are transmitted. If 2D is not present, the 1D component is not
transmitted.
+ Auto Discriminate - the digital scanner determines if there is a 2D portion, then transmits the 1D
component, as well as the 2D portion if present. (default).
• UK Postal
- Report Check Digit - Transmit UK Postal data with or without the check digit. A check in the checkbox
indicates to send UK Postal data with check digit (default - disabled).
• Codabar
DataWedge Configuration | 65
Decode Lengths on page 67
Decode Lengths on page 67
Decode Lengths on page 67
Decode Lengths on page 67
MN000887A01-B | April 2015
for more information.
for more information.
for more information.
for more information.