Creating A Rule; Defining A Rule - Motorola MC32N0 Integrator Manual

76 | DataWedge Configuration
Figure 68: Advanced Data Formatting Screen
5 Touch the Enable checkbox to enable ADF.

Creating a Rule

Note: By default, Rule0, is the only rule in the Rules list.
Procedure:
1
Press .
2 Touch New rule.
3 Touch the Enter rule name text box.
4 In the text box, enter a name for the new rule.
5 Touch Done.
6 Touch OK.

Defining a Rule

Procedure:
1 Touch the newly created rule in the Rules list.
Figure 69: Rule List Screen
2 Touch the Rule enabled checkbox to enable the current rule.
April 2015 | MN000887A01-B