Table of Contents
Advertisement
Watch Settings
While the watch is connected to a phone, it will
automatically adjust its date and time settings
to those of the phone. If the watch is not
connected to a phone, use the procedure
below to adjust its date and time settings.
Getting ready
Perform this procedure in the Timekeeping
Mode. Use (D) to navigate to the Timekeeping
Mode.
Navigating Between Modes
l
Timekeeping Mode
Specifying a Home Time City
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
enable or disable summer time.
Important!
The World time will not be correct if
●
you select the wrong city as your
Home Time City.
Note
Your watch has 40 built-in cities that
●
you can select as a Home Time City.
If you are using the watch in a
location that is not among the built-
in cities, use the built-in city that is in
the same time zone as your location.
For information about built-in cities,
see the
"City Name
List".
1.
Hold down the (A) button for about two
seconds.
[SET] will appear first, followed by the
Home Time City name.
Operation Guide 5427
2.
Use (B) and (E) to scroll through city
names until the one you want to use as
your Home City is displayed.
Holding down (B) or (E) scrolls city
●
names at high speed.
3.
To change the summer time setting, press
(D).
If you don't want to change the summer
●
time setting, press (A) twice to exit the
setting screen.
4.
Press (E) to cycle through the summer
time settings below.
[AT]
●
The watch switches between standard
time and summer time automatically.
[--]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
5.
Press (A) twice to exit the setting screen.
Note
The summer time setting of the
●
watch is "AT (Auto)" when you
purchase it, so it will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you
are in an area that does not observe
summer time, you can leave the
watch's summer time setting as "AT
(Auto)".
For information about summer time
●
switching dates, see the
Time
Table.
If the currently indicated time is
●
summer time, the DST indicator will
be shown on the display.
Summer
DST indicator
Setting the Time and Date
1.
Hold down the (A) button for about two
seconds.
[SET] will appear first, followed by the
Home Time City name.
2.
Press (D) six times until the seconds digits
are flashing on the display.
Seconds
3.
Press (E) to reset the seconds count to 00.
If the seconds count is between 30 and
●
59 when you press (E), 1 will be added
to the minute count.
4.
Press (D) so the hour setting is flashing.
Hours
5.
Set the date.
Use (B) and (E) to change the currently
●
flashing value.
Each press of (D) cycles the flashing
●
setting in the following sequence: hour,
minute, year, month, day, seconds.
6.
Press (A) twice to exit the setting screen.
9
Advertisement
Table of Contents
