Advertisement
Quick Links
© 2013 CASIO COMPUTER CO., LTD.
MA1311-EA
Be sure to keep all user documentation handy for future reference.
Your watch may differ somewhat from the one shown in the illustration.
Day of the week
Crown Operations
Some water-resistant models (100 meters, 200 meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull the
crown out. Avoid applying undue force when pulling. The watch
loses its water resistance while the crown is unscrewed. After
performing a crown operation, fully screw the crown back in.
If your watch has a rotary bezel...
You can rotate the bezel to align its ▼ mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the ▼ mark.
Specifi cations
Accuracy at normal
temperature (per month)
±20 seconds
Operating Precautions
Water Resistance
The following applies to watches with WATER RESIST or WATER RESISTANT marked
on the back cover.
On watch front or on
Marking
back cover
Hand washing, rain
Water-related work, swimming
Example of
Daily Use
Windsurfi ng
Skin diving
Do not use your watch for scuba diving or other types of diving that requires air tanks.
Watches that do not have WATER RESIST or WATER RESISTANT marked on the back
cover are not protected against the effects of sweat. Avoid using such a watch under
conditions where it will be exposed to large amounts of sweat or moisture, or to direct
splashing with water.
Even if a watch is water resistant, note the usage precautions described below. Such
types of use reduce water resistance performance and can cause fogging of the glass.
−
Do not operate the crown or buttons while your watch is submersed in water or wet.
−
Avoid wearing your watch while in the bath.
−
Do not wear your watch while in a heated swimming pool, sauna, or any other high
temperature/high humidity environment.
−
Do not wear your watch while washing your hands or face, while doing housework, or
while performing any other task that involves soaps or detergents.
After submersion in seawater, use plain water to rinse all salt and dirt from your watch.
To maintain water resistance, have the gaskets of your watch replaced periodically
(about once every two or three years).
A trained technician will inspect your watch for proper water resistance whenever you
have its battery replaced. Battery replacement requires the use of special tools. Always
request battery replacement from your original retailer or from an authorized CASIO
service center.
Some water-resistant watches come with fashionable leather bands. Avoid swimming,
washing, or any other activity that causes direct exposure of a leather band to water.
The inside surface of the watch glass may fog when the watch is exposed to a sudden
drop in temperature. No problem is indicated if the fogging clears up relatively quickly.
Sudden and extreme temperature changes (such as coming into an air conditioned
room in the summer and standing close to an air conditioner outlet, or leaving a heated
room in the winter and allowing your watch to come into contact with snow) can cause
it to take longer for glass fogging to clear up. If glass fogging does not clear up or if you
notice moisture inside of the glass, immediately stop using your watch and take it to
your original retailer or to an authorized CASIO service center.
Your water-resistant watch has been tested in accordance with International
Organization for Standardization regulations.
Band
Tightening the band too tightly can cause you to sweat and make it diffi cult for air
to pass under the band, which can lead to skin irritation. Do not fasten the band too
tightly. There should be enough room between the band and your wrist so you can
insert your fi nger.
Deterioration, rust, and other conditions can cause the band to break or come off
of your watch, which in turn can cause band pins to fl y out of position or to fall out.
This creates the risk of your watch falling from your wrist and becoming lost, and also
creates the risk of personal injury. Always take good care of your band and keep it
clean.
Immediately stop using a band if you even notice any of the following: loss of band
fl exibility, band cracks, band discoloration, band looseness, band connecting pin fl ying
or falling out, or any other abnormality. Take your watch to your original retailer or to a
CASIO service center for inspection and repair (for which you will be charged) or to have
the band replaced (for which you will be charged).
Temperature
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Operation Guide 5420/5421
Shibuya-ku, Tokyo 151-8543, Japan
Click 1
Crown
24-Hour Hand
Day
Current
Battery type
SR920SW
Approx. 3 years
Enhanced Water Resistance Under
Water
Daily Use
Resistance
Under Daily
5
Use
Atmospheres
Atmospheres
No
5BAR
10BAR
BAR mark
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
No
No
Yes
Printed in China
Imprimé en Chine
Gedruckt in China
MA1311-A
ENGLISH
To adjust the day of the week and time
When the second hand is at 12 o'clock, pull
the
Crown
Click 2
Rotate the
minute hand settings, which will also change
as the day of the week setting.
Rotate the
Push the
Crown
Crown
To change the day setting
Pull the
Crown
Rotate the
Loosen
Push the
Crown
Start
Elapsed time
Battery life
Leather Band
Allowing your watch to remain in contact with other items or storing it together with
other items for long periods while it is wet can cause the color of the leather band to
transfer to the other items or the color of the other items to transfer to the leather band.
Be sure to dry off your watch thoroughly with a soft cloth before storing it and make
sure it is not in contact with other items.
Leaving a leather band where it is exposed to direct sunlight (ultraviolet rays) for long
periods or failure to clean dirt from a leather band for long periods can cause it to
10
20
become discolored.
Atmospheres
CAUTION: Exposing a leather band to rubbing or dirt can cause color transfer and
discoloration.
20BAR
Yes
Metal Components
Failure to clean dirt from metal components can lead to formation of rust, even if
Yes
components are stainless steel or plated. If metal components exposed to sweat or
Yes
water, wipe thoroughly with a soft, absorbent cloth and then place the watch in a well-
Yes
ventilated location to dry.
Use a soft toothbrush or similar tool to scrub the metal with a weak solution of water
and a mild neutral detergent, or with soapy water. Next, rinse with water to remove all
remaining detergent and then wipe dry with a soft absorbent cloth. When washing metal
components, wrap the watch case with kitchen plastic wrap so it does not come into
contact with the detergent or soap.
Bacteria and Odor Resistant Band
The bacteria and odor resistant band protects against odor generated by the formation
of bacteria from sweat, which ensures comfort and hygiene. In order to ensure
maximum bacteria and odor resistance, keep the band clean. Use an absorbent soft
cloth to thoroughly wipe the band clean of dirt, sweat, and moisture.
A bacteria and odor resistant band suppresses the formation of organisms and bacteria.
It does not protect against rash due to allergic reaction, etc.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage
or loss suffered by you or any third party arising through the use of your watch or its
malfunction.
User Maintenance
Caring for Your Watch
Remember that you wear your watch next to your skin, just like a piece of clothing.
To ensure your watch performs at the level for which it is designed, keep it clean by
frequently wiping with a soft cloth to keep your watch and band free of dirt, sweat, water
and other foreign matter.
Whenever your watch is exposed to sea water or mud, rinse it off with clean fresh
water.
For a metal band or a resin band with metal parts, use a soft toothbrush or similar tool
to scrub the band with a weak solution of water and a mild neutral detergent, or with
soapy water. Next, rinse with water to remove all remaining detergent and then wipe dry
with a soft absorbent cloth. When washing the band, wrap the watch case with kitchen
plastic wrap so it does not come into contact with the detergent or soap.
For a resin band, wash with water and then wipe dry with a soft cloth. Note that
sometimes a smudge like pattern may appear on the surface of a resin band. This will
not have any effect on your skin or clothing. Wipe with a cloth to remove the smudge
pattern.
Clean water and sweat from a leather band by wiping with a soft cloth.
Not operating a watch crown, buttons, or rotary bezel could lead to later problems with
their operation. Periodically rotate the crown and rotary bezel, and press buttons to
maintain proper operation.
Dangers of Poor Watch Care
Rust
Though the metal steel used for your watch is highly rust-resistant, rust can form if your
watch is not cleaned after it becomes dirty.
−
Dirt on your watch can make it impossible for oxygen to come into contact with the
metal, which can lead to breakdown of the oxidization layer on the metal surface and
the formation of rust.
Note
out to Click 2.
to advance the hour and
Crown
to change the time setting.
Crown
back in.
Note
out to Click 1.
Crown
to set the day.
back in.
Kronenbedienung
Bestimmte wasserres
besitzen eine Schraub
Take care that you set the
lösen Sie bitte deren
correct AM or PM time.
sich hin drehen. Ziehe
When changing the time,
mit übermäßiger Kraft
move the minute hand four
ist die Uhr nicht wass
or fi ve minutes past your
nach der Betätigung w
fi nal setting, and then back it
up to the setting you want.
Falls die Uhr einen
The 24-Hour Hand indicates
the current hour of the day.
Sie können den Zeitm
It makes one complete
Markierung ▼ auf den
rotation every 24 hours.
Dadurch ist dann able
dem Einstellen der M
Technische D
The day setting uses a
31-day month. Make
Normaltemperatur (p
adjustments for months of
shorter lengths.
Avoid changing the day
setting between the hours
of 9 p.m. and 1 a.m.
Otherwise, the day setting
may not change correctly at
midnight.
Wichtige Hinwe
Wasserresistenz
Für Uhren, die auf de
gekennzeichnet sind,
Kennzeichnung
Beispiele für
täglichen
Gebrauch
Benutzen Sie diese U
Sauerstofffl aschen er
Uhren, die auf dem R
gekennzeichnet sind,
Vermeiden Sie, solch
Mengen an Schweiß
Auch wenn die Uhr w
Vorsichtsmaßregeln z
Wasserresistenz und
−
Betätigen Sie nicht
ist.
−
Vermeiden Sie, die
−
Tragen Sie die Uhr
anderen Umgebun
−
Tragen Sie die Uhr
bei Hausarbeiten o
Reinigungsmitteln.
Spülen Sie nach eine
normalem Wasser vo
Um die Wasserresist
ersetzen lassen (ung
Qualifi ziertes Fachpe
der Uhr. Zum sachge
Lassen Sie die Batte
Kundendienststelle a
Manche wasserresist
Wenn Sie eine solche
Aktivitäten, bei denen
Das Uhrglas kann inn
ausgesetzt ist. Dies s
verschwindet. Bei plö
Sommer in einen klim
wenn man im Winter
Schnee bringt) kann
Wenn der Beschlag n
stellen Sie die Benutz
Originalhändler oder
Die Uhr wurde nach
ihre Wasserresistenz
Armband
Wenn das Armband
die Luftzirkulation un
Ziehen Sie das Armb
so viel Platz bleiben,
Alterung, Rost und a
oder sich von der Uh
Entsprechend kann d
Verletzungen verursa
Sie es sauber.
Stellen Sie die Benut
Zustände feststellen:
Lockerheit des Band
anormale Zustände.
berechnet werden) zu
lassen Sie das Armba
Temperatur
1
Lassen Sie die Uhr n
Heizgerät oder an an
ist. Lassen Sie die Uh
Übermäßig hohe ode
oder nachgeht, stehe
Stöße
Diese Uhr ist so kons
Aktivitäten wie Ballsp
gelassen oder anderw
Defekt zur Folge hab
G-ms) können auch b
Woch
Ganggenauigke
±20 Sekunde
Auf Vorde
Rücken d
Händewas
Wasser be
Tätigkeiten
Windsurf
Tauchen
Advertisement
