Table of Contents
Advertisement
Charging Times
The table below shows general guidelines for
charging times under various light sources.
Actual charging time depends on your local
environment.
Charge Level
Light Intensity
1
3 hours
A
High
8 hours
B
p
12 hours
C
Low
147 hours
D
Charge Level 1:
Time from dead battery until hand movement
starts
Charge Level 2:
Time from hand movement starts until a full
charge
Light Intensity
A Sunny day, outdoors (50,000 lux)
B Sunny day, near a window (10,000 lux)
C Overcast day, near a window (5,000 lux)
D Indoor fluorescent lighting (500 lux)
Note
Actual charging time depends on the
●
local charging environment.
Remaining Charge and Dead
Battery
The charge level is indicated by watch hand
movement. Functions become disabled as
battery power goes low.
Important!
Should battery go low or go dead,
●
expose the face (solar panel) to light
as soon as possible.
Note
While [R] is flashing, some functions
●
are temporarily disabled to avoid
running down the battery.
Operation Guide 5427
Low Battery Power
●
In the Timekeeping Mode, the second hand
jumps at two-second intervals. Other watch
functions operate normally.
Charge Level
2
35 hours
130 hours
208 hours
-
If power drops even further, all hands will
stopped at 12 o'clock and [CHG] will flash.
Dead Battery
●
All hands are stopped at 12 o'clock and digital
displays are blank.
Power Saving Function
Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and 6
a.m. will cause the second hand to stop, and
the watch to enter Level 1 power saving. If the
watch is left in this condition for six or seven
days, all hands will stop at 12 o'clock and the
watch will enter Level 2 power saving.
Level 1:
Second hand stops and digital displays go
blank to save power.
Level 2:
All hands stop moving, Bluetooth connection
is terminated, alarms are turned off, and digital
displays go blank to save power.
Recovering from Power Saving
●
Operation
Press any button or place the watch in a well-
lit area to recover from power saving.
Note
You can enable or disable Power
●
Saving.
Configuring Power Saving Function
l
Settings
Second hand
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically in
accordance with the phone's time setting.
Note
This function is available only while
●
CASIO WATCH+ is running on the
phone.
This section describes watch and
●
phone operations.
X : Watch operation
Y : Phone operation
Getting Ready
A Installing required app on your
phone
To use the watch with a phone, first tap one of
the links below and install the "CASIO WATCH
+" app on the phone.
iOS (iPhone)
●
https://itunes.apple.com/us/app/
id760165998?ls=1&mt=8
Android (GALAXY, etc.)
●
https://play.google.com/store/apps/details?
id=com.casio.watchplus
B Configuring Bluetooth settings
Enable the phone's Bluetooth.
iPhone Users
1.
Y On the Home Screen, tap "Settings" n
"Bluetooth".
2.
Y Enable "Bluetooth".
3.
Y Tap "Settings" to return to the "Settings"
screen.
4.
Y Tap in the following sequence:
"Privacy" n "Bluetooth Sharing".
5.
Y Enable "CASIO WATCH+".
3
Advertisement
Table of Contents
