U-Shaped Dinette/Bed Conversion - Winnebago Sunstar 26HE User Manual

Bed to Dinette
Reverse steps to convert back into dinette
seating.
Once the table is reattached onto the wall
support, make sure the table leg is secured into
the floor support bracket and the leg brace is
locked.
Floor
Support
Bracket
U-SHAPED DINETTE/BED
CONVERSION
–If Equipped
(Typical View – Your coach may differ in
appearance)
The U-Shaped Dinette can be converted into
additional sleeping space when needed by
lowering the dinette table and arranging the
dinette cushions.
1. Get a partner to help you lift the table top
upward off the support tubes and set the table
top edgewise onto the floor to remove the
table leg tubes.
FURNITURE AND SOFTGOODS
2. Pull the table leg tubes from the floor or table
sockets and store beneath dinette seat.
3. Place the table top onto the ledge of the dinette
seat.
Place table
top onto
ledge.
4. Place the center back dinette cushion into
place over the table to complete the bed
conversion.
Reverse steps to reassemble to dinette
configuration.
SECTION 9 -
9-3