U-Shaped Dinette/Bed Conversion - Winnebago Suncruiser Owner's Manual

SECTION 9 –
FURNITURE AND SOFTGOODS
2. Insert dinette table extension (located in the
rear wardrobe). Align table extension pegs
with table insert holes and push edge of
dinette table in to adjoin with the table
extension.
3. Release the catch on the table leg brace
(located on the bottom side of dinette table)
and lower table leg for support.
NOTE: Some models may feature an extra-wide
dinette table with two support legs to be
lowered.
Release
Catch
9-8
NOTE: Two folding chairs are provided for
additional seating when needed and are
stored in the rear wardrobe, under the
bed or exterior compartment, depending
on model.
• Reverse steps to store dinette table extension.
NOTE: Be sure to store dinette back into
standard position before converting
dinette into additional bed space.
NOTICE
Raise dinette table leg(s) and convert
dinette into stored position before
retracting the slideout room to avoid
property damage.
Dinette Table Leg Adjustment
It may be necessary to adjust the height of the
dinette table leg(s). Twist the knob on the bottom
of table leg up or down until you achieve an even
height.
Height Adjustment Knob
U-SHAPED DINETTE/BED
CONVERSION
–If Equipped
(Typical View – Your coach may differ in
appearance)
The U-Shaped Dinette can be converted into
additional sleeping space when needed by
lowering the dinette table and arranging the
dinette cushions.