Winnebago Sunstar 26HE User Manual page 80

SECTION 9 -
FURNITURE AND SOFTGOODS
Dinette to Bed
1. Remove both dinette back cushions and set
aside.
2. Lift both dinette seat cushions upward.
3. Release the table leg from the floor support
bracket.
Floor
Support
Bracket
9-2
4. Release the catch on the table leg brace and
fold the leg up against the bottom of the table.
Table Leg
Catch
5. Remove the table from the wall support
bracket by lifting the end of the table.
6. Then lower the table to rest on the cleats
attached to each dinette bench.
7. Arrange dinette cushions to cover bed area.
NOTE: Additional bolsters may be included with
your dinette to cover bed area.
Wall
Support
Table
Bracket