Radio - In-Dash; Radio In-Dash/Rearview Monitor System - Winnebago Sunstar 26HE User Manual

SECTION 3 -
DRIVING YOUR MOTORHOME
RADIO – IN-DASH
–If Equipped
Further Information
Please refer to the manufacturer's operating
guide in your InfoCase for detailed instructions
on programming preset station buttons and using
this system.
RADIO IN-DASH/REARVIEW
MONITOR SYSTEM
–If Equipped
The radio in your coach can receive AM/FM
stereo stations. It also has a CD/DVD player for
your listening enjoyment through quality high-
output speakers located in several areas of the
coach.
This system is also featured with a rearview
camera monitor system, which lets you see what
is directly behind your coach for safety and
maneuvering assistance. The viewing screen is
integrated into the dash.
The radio screen switches automatically when
the transmission is shifted into reverse.
NOTE:The camera polarity setting needs to be
set to "Battery" for automatic camera
viewing when the vehicle is put into
reverse. This can be set by pushing the
HOME button, select SYSTEM under
settings, and scroll down to "Camera
Polarity" and pushing the menu until it
reads "Battery". This will need to be
reset every time the power is
disconnected from the radio.
3-8
Basic Operating Instructions
• (1) RESET - Press to reset the
microprocessor.
• (3) +/- VOLUME - Press to set the volume.
• (4) MUTE - Press to mute audio.
• (5) HOME - Press to switch the display.
• (6) MODE - Turns the information display
off.

• (7) TRK - Press for manual tuning.
Press and hold for seek tuning.
• (8) EJECT - Press to eject the CD/DVD.
• (10) DISC LOADING SLOT
Sideview Cameras
The sideview cameras (built into the driver
and passenger side mirrors) activate with the
corresponding turn signals and replace the rear
camera view on the monitor until the turn is
completed or the signal lever is canceled
manually.
Satellite Radio
–If Equipped
Your coach may be equipped with a
®
SiriusXM satellite radio receiver that plays
through your radio.
See the receiver manufacturer's information
in your InfoCase for programming and operating
instructions.