Connecting The Base To The Pabx; Dialling Mode And Flash Time; Setting Pauses - Gigaset A510A User Manual

Connecting the base to
the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
manual.

Dialling mode and Flash time

Setting flash time
Your phone is preset for operation on the
main connection. For operation on a PABX,
you may have to change this value. Please
refer to the user guide for your PABX.
§Menu§
Open main menu.
P#Q5#12
Press keys.
~
Enter number for the flash time
and press
0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
3 = 400 ms; 4 = 250 ms; 5 = 300 ms;
6 = 600 ms; 7 = 800 ms
§OK§
.

Connecting the base to the PABX

Setting pauses

Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key c
and sending the number.
§Menu§
Open main menu.
P#Q5#1O
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.; 2 = 3 secs;
3 = 7 secs) and press
Changing the pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
§Menu§
Open main menu.
P#Q5#14
Press keys.
~
Enter a number for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms) and
§OK§
press
§OK§
.
.
49