Resetting Fast Access For The Answering Machine Using Key 1; Operating When On The Move (Remote Operation); Playing Messages - Gigaset A510A User Manual

Information about ring delay
In Auto mode, the following applies for ring
delay:
u If there are no new messages, the answer-
ing machine answers a call after 18 sec-
onds.
u If there are new messages, the answering
machine answers a call after 10 seconds.
When operating remotely (¢ page 39), you
can then tell after approx. 15 seconds that
there are no new messages (otherwise the
answering machine would have already
accepted your call). There are no call charges
if you hang up now.
Resetting fast access for the
answering machine using
key 1
To access the answering machine, simply
press and hold the 1 key – you do not have
to select it via the menu.
The integrated answering machine has
already been preset at the factory. However,
if you have set the network mailbox for fast
access (¢ page 40), you can change this set-
ting.
¤ Voice Mail ¤ Set Key 1
§Menu§
Answer Machine
Select and press
The setting for fast access applies to all regis-
tered handsets.
Operating the Gigaset A510A base answering machine
§OK§
.
Operating when on the move
(remote operation)
You can check and activate your answering
machine from any other telephone (hotel,
pay phone etc.).
Prerequisites:
u You have set a system PIN other than
0000 (¢ page 48).
u The phone you are using for remote oper-
ation has tone dialling (DTMF) i.e., you
hear different tones when you press the
keys. Alternatively, you can use a code
transmitter (available from retailers).
Calling the answering machine and

playing messages

~
Dial your own number.
9 ~
When you hear your announce-
ment, press 9 and enter the
system PIN.
You are informed whether any new mes-
sages have been recorded. The messages are
now played back. You can now operate the
answering machine with the keypad.
You use the following keys:
A
To return to the start of the cur-
rent message.
Press twice to go back to the
previous message.
B
Stop playback. Press again to
resume.
3
Go to the next message.
0
Delete current message.
Activating the answering machine
¤ Phone home and let the phone ring until
you hear: "Please enter PIN".
~
Enter system PIN.
Your answering machine is activated. It tells
you how much memory is left.
The messages are played.
The answering machine cannot be deacti-
vated remotely.
39