Uprgrade Firmware; Unlock Media - Datavideo HDR-60 Quick Start Manual

UPRGRADE FIRMWARE

Update the HDR-60 firmware step:
1. Select the FORMAT MEDIA to format 2.5'' HDD.
2. Turn off the HDR-60 power.
3. Move out the 2.5''HDD of HDR-60.
4. Connect it to your computer.
5. Rename FW file to "flash.bin".
6. Copy the firmware update file (flash.bin) to the root directory of 2.5''HDD.
7. Insert the 2.5'' HDD in the HDR-60 and select the UPGRADE FIRMWARE option and follow the instructions
WARNING: Wait until you see
Press the (MENU) button into the menu mode.
Press the (ENTER) button into the TOOL menu.
Press the (NEXT) button three times to select the UPRGRADE FIRMWARE menu.
Press the (ENTER) button to upgrade the HDR-60 firmware.
*NB: The process will take approximately few minutes to complete.

UNLOCK MEDIA

After you record file at HDR-60, the 2.5''HDD format is read only, if you want to copy a computer file to this 2.5''HDD,
you need unlock media for 2.5'' HDD.
Press the (MENU) button into the menu mode.
Press the (ENTER) button into the TOOL menu.
Press the (NEXT) button four times to select the UNLOCK MEDIA menu.
Press the (ENTER) button to unlock media files.
UPGRADE FINISH!
PLEASE POWER CYCLE!
8
then reboot system.