Datavideo HDR-60 Quick Start Manual
  1. Manuals
  2. Brands
  3. Datavideo Manuals
  4. DVR
  5. HDR-60
  6. Quick start manual
Datavideo HDR-60 Quick Start Manual

Datavideo HDR-60 Quick Start Manual

Datavideo hdr-60 hd/sd digital video recorder
Hide thumbs Also See for HDR-60:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Datavideo HDR-60

Summary of Contents for Datavideo HDR-60

  • Page 2: Table Of Contents

    SAVE SETUP ..............................12 RECALL SETUP .............................. 12 STATUS .................................. 12 How to Assemble 2.5" HDD in Removable Rack ......................13 HDR-60/70 GPI Pin Define ............................. 14 HDR-60/70 RS-232/422 Control Command ........................15 Specifications ................................19 Service & Support ................................. 20...

  • Page 3: Warranty

    Certain parts with limited lifetime expectancy such as LCD Panels, DVD Drives, Hard Drives are only covered for the first 10,000 hours, or 1 year (whichever comes first). Any second year warranty claims must be made to your local Datavideo office or one of its authorized Distributors before the extended warranty expires.

  • Page 4: Connections & Controls

    3~5 seconds. In Play Mode (Record Mode button light off), press play button, HDR-60 is in play state, HDR-60 can play the file immediately. Note: In Record Mode playing file, if HDR-60 SDI source lost signal, the playing file’s video and audio will be not synchronized, so please play file in the...
  • Page 5 To start recording press the Record Button and Play Button simultaneously. Note1: Unit will not record if no video signal is present. Note2: In HDR-60 play state, press Record button, display panel will show the CH1~CH4 audio meters; press Record button again will show the CH5~CH8 audio meters.

  • Page 6: Rear Panel

    Rear Panel The GPI socket can be used for external control. The HDR-60 can accept pulse or level trigger inputs to activate record or playback and pause commands. Mini XLR inputs and Outputs for Balanced Audio Connection. Black Burst input/ output Can be used as a video reference source when synchronization other devices to the HDR-60.

  • Page 7: Menu Key Function

    (ENTER) button into the FIRMWARE REVISION menu. Press the (NEXT) button to see other Firmware information. ERASE THIS BIN ERASE THIS BIN is used for deleting individual bins from the HDR-60. (MENU) button into the menu mode. Press the Press the (ENTER) button into the TOOL menu.

  • Page 8: Uprgrade Firmware

    *NB: The process will take approximately few minutes to complete. UNLOCK MEDIA After you record file at HDR-60, the 2.5’’HDD format is read only, if you want to copy a computer file to this 2.5’’HDD, you need unlock media for 2.5’’ HDD.

  • Page 9: Setup

    SETUP RECORD SETUP Press the (MENU) button into the menu mode. Press the (NEXT) button to select the SETUP menu. Press the (ENTER) button into the SETUP menu. Press the (ENTER) button into the RECORD SETUP menu. Press the (ENTER) button into the SET HD ENCODE FORMAT / SET SD ENCODE FORMAT / SET REC FILE TYPE / SET REC CHANNEL NUM / SET SD ASPECT RATIO / TIME-LAPSE SETUP / PWR ON AUTO- RECORD menu.

  • Page 10: Play Setup

    PLAY SETUP Press the (MENU) button into the menu mode. Press the (NEXT) button to select the SETUP menu. Press the (ENTER) button into the SETUP menu. Press the (NEXT) button to select the PLAY SETUP menu. Press the (ENTER) button into the PLAY SETUP menu. Press the (ENTER) button into the SET LOOP PLAY / POWER ON AUTO-PLAY / SET GEN LOCK / SET PLAY CENTRIC / menu.

  • Page 11: System Setup

    Setting the remote control from RS-232 or RS-422. SET BUZZER This buzzer will be activated to alarm if there is a "un-recoverable" defect of HDR-60/70. SET LONG TIME STOP Setting the HOLD 1 SEC TO STOP function on / off.

  • Page 12: Save Setup

    SAVE SETUP Press the (MENU) button into the menu mode. Press the (NEXT) button into the SETUP menu. Press the (ENTER) button into the SETUP menu. Press the (NEXT) button three times to select the SAVE SETUP menu. Press the (ENTER) button into the SAVE SETUP menu.

  • Page 13: How To Assemble 2.5" Hdd In Removable Rack

    2. Assemble four screws to fasten 2.5" HDD on PCB. 3. Push PCB into the HDD rack. 4. Assemble two screws to fasten HD rack rear cover. 5. Push 2.5" HDD Removable rack into HDR-60 then turn button to left lock the rack.

  • Page 14: Hdr-60/70 Gpi Pin Define

    HDR-60/70 GPI Pin Define...

  • Page 15: Hdr-60/70 Rs-232/422 Control Command

    HDR-60/70 RS-232/422 Control Command 1. Interface Overview  Standard transmission rate on the interface bus is 38400 bits per seconds (bps)  1 Start bit + 8 Data bits + 1 Parity bit + 1 Stop bit. Odd Parity 2. Command Table...
  • Page 16 The“00h, 11h, 11h : DEVICE TYPE REQUEST” command is used for asking the specifications of the HDR-60/70 used as DEVICE. When the DEVICE receives this command, it attaches 2-bytes specification data to “12h 11h : DEVICE TYPE” and sends the information to the CONTROLLER.
  • Page 17 5. Vender Unique System Control 21h, F1h, 02h, 14h : Next Clip 21h, F2h, 02h, 15h : Previous Clip Note: Only can do clip-change at play-pause 6. Firmware Revision Sense Data[7bytes] Firmware Revision Sense (Recorder) Byte[0]: ROM Byte [1]: FW Major Byte [2]: FW Minor Byte [3]: File System Byte [4]: FPGA...
  • Page 18 8. Status Sense Control Command Response Bytes Mode Status: 0=Play Mode 1=Record Mode Status Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Byte Busy Cartridge Wrong Local Media enable Stop Rewind Fast Record Play Forward...

  • Page 19: Specifications

    Specifications HDD: 250/320/500/750 GB HDD Size SSD: 120/128/240/256/480/512 GB HD/SD-SDI Video Input Time code HD/SD-SDI Video Output HDMI Time code IN/OUT Time code Balance Audio Analog 2-CH Audio Input HD/SD-SDI ( 8CH) Balance Audio Analog 2-CH Audio Output HD/SD-SDI (8CH) HDMI / 4 CH Headphone REC / PLAY...

Table of Contents