System Setup - Datavideo HDR-60 Quick Start Manual

SYSTEM SETUP

Press the (MENU) button into the menu mode.
Press the (NEXT) button to select the SETUP menu.
Press the (ENTER) button into the SETUP menu.
Press the (NEXT) button twice to select the SYSTEM SETUP menu.
Press the (ENTER) button into the SYSTEM SETUP menu.
Press the (ENTER) button into the SET AUDIO MONITOR / SELECT AUDIO SOURCE / SET TIMECODE /
SET GPI / SET REMOTE INTERFACE / SET BUZZER / SET LONG TIME STOP / DATE & TIME SETUP menu.
SET AUDIO MONITOR
Setting the AUDIO MONITOR display channel 1&2, 3&4, 5&6 or 7&8.
SET AUDIO SOURCE
Setting the AUDIO SOURCE (CH1&2) from SDI or XLR (analog input).
SET TIMECODE
Setting the TIME CODE running at INTERNAL RCA RUN / INTERNAL FREE RUN / EXTERNAL TC IN or EXTERNAL
SDI TC.
SET GPI
SET GPI MODE - Setting the GPI mode at PULSE or LEVEL.
SET GPI FUNCTION - Setting the GPI start trigger for recording or playing.
SET REMOTE INTERFACE
Setting the remote control from RS-232 or RS-422.
SET BUZZER
This buzzer will be activated to alarm if there is a "un-recoverable" defect of HDR-60/70.
SET LONG TIME STOP
Setting the HOLD 1 SEC TO STOP function on / off.
DATE & TIME SETUP
Setting the DATE & TIME.
11