Table of Contents
Advertisement
Connections & Controls
Front Panel
Power On / Off Button. This is a soft power on / off button which powers the unit
on from standby; the main power on / off switch is on the rear.
Display Panel. Shows bin number, time code, audio meters or the Menu Display.
Menu Button. This calls up the menu display which is navigated using the
Previous / Next Buttons.
Note1: In play state, press MENU button, the display panel will show the
information of the playing file.
Note2: In record state, press MENU button, display panel will show the
information of recording file.
Fwd / Rew Buttons. In playback state, these buttons will operate as Fast Forward
and Rewind Buttons.
While the unit is playing, press Fwd or Rew button and then press Previous / Next
Buttons; If pressed multiple times, HDR-60 will fast play forward or rewind in x1,
x3, x6, x9, and x12.
Record Mode Button. When you want to record press the Record Mode button
first.
In Record Mode (Record Mode button light on), press play button, HDR-60 must
be
internal conversion
to play state; wait 3~5 seconds.
In Play Mode (Record Mode button light off), press play button, HDR-60 is in play
state, HDR-60 can play the file immediately.
Note: In Record Mode playing file, if HDR-60 SDI source lost signal, the playing
file's video and audio will be not synchronized, so please play file in the
Play Mode.
4
Advertisement
Table of Contents
