Adding The Printer - Xerox Phaser 6022 User Manual

Adding the Printer

For networking, set up your printer using Bonjour (Rendezvous), or connect using the IP address of your
printer for an LPD/LPR connection. For a non-network printer, create a desktop USB connection.
To add the printer using Bonjour:
From the computer Applications folder or from the dock, open System Preferences.
1.
2. Click Print & Fax.
The list of printers appears on the left of the window.
3. Click the plus button (+) under the list of printers.
4. Click the Default icon at the top of the window.
Select your printer from the list and click Add.
5.
Note: If your printer was not detected, verify that the printer is on and that the Ethernet or USB
cable is connected properly.
To add the printer by specifying the IP address:
1. From the computer Applications folder or from the dock, open System Preferences.
Click Print & Fax.
2.
The list of printers appears on the left of the window.
3. Click the plus button (+) under the list of printers.
Click IP.
4.
5. From the Protocol drop-down menu, select the protocol.
6. In the Address field, enter the IP address of the printer.
7. In the Name field, enter a name for the printer.
From the Print Using drop-down list, choose Select a driver to use.
8.
9. Select the print driver for your printer model from the list.
10. Click Add.
See also:
Online Support Assistant at: www.xerox.com/office/6022support
Installation and Setup
® ®
Xerox Phaser 6022 Printer
User Guide
41