Xerox Phaser 6022 User Manual page 114

Troubleshooting
Symptom
Paper curls or frequent jams in
the rear cover
® ®
114 Xerox Phaser 6022 Printer
User Guide
Cause
The bias transfer roller voltage is
insufficient for the paper type.
The fuser is not adjusted for the
paper type.
The paper is damp.
The relative humidity of the
room is too high.
The bias transfer roller needs to
be refreshed.
Solution
Increase the bias transfer voltage for the
selected paper type. For details, see
Adjusting the Bias Transfer Roller
page 89.
Adjust the fuser. For details, see
Adjusting the Fuser on page 90.
Replace the paper.
Reduce the humidity in the room or move
the printer to a new location.
Refresh the bias transfer roller. For
details, see Refreshing the Bias Transfer
Roller on page 90.
on