Xerox Phaser 6022 User Manual page 113

Symptom
Vertical blanks
Slanted printing
Colors are blurry or there is white
area around objects
Blotchy or mottled images
Cause
The altitude setting is incorrect.
Condensation inside the printer
causes partial blanks or creased
paper.
The lenses are being blocked.
The printer is worn or damaged.
The toner cartridges are not
®
Xerox toner cartridges.
The paper guides are not
correctly adjusted to the paper
size.
Color-to-color alignment is not
correct.
The paper is too light or too thin. Choose a different paper type at the
Solution
Adjust the altitude setting of the printer.
For details, see Adjusting the Altitude
page 90.
Turn on the printer and leave it on for at
least one hour remove the condensation.
For assistance, go to the Xerox
website at
www.xerox.com/office/6022support.
Clean the lenses inside of the printer. For
details, see Cleaning the LED Lenses
page 83.
For assistance, go to the Xerox
website at
www.xerox.com/office/6022support.
Replace the toner cartridges with
®
genuine Xerox toner cartridges. For
details, see Consumables
Reset the paper tray guides. For details,
see Loading Paper on page 63.
Perform an automatic color registration
adjustment. For details, see
Registration on page 88.
control panel, in the application, and in
the print driver.
® ®
Xerox Phaser 6022 Printer
Troubleshooting
on
®
Support
on
®
Support
on page 91.
Color
113
User Guide