Moving The Printer - Xerox Phaser 6022 User Manual
Hide thumbs
Also See for Phaser 6022:
- Quick use manual (6 pages) ,
- Service manual (99 pages) ,
- Quick use manual (5 pages)
Table of Contents
Advertisement
Maintenance
Moving the Printer
To move the printer:
1.
Turn off the printer and disconnect the power cord and other cables from the back of the printer.
WARNING:
To prevent electric shock, never touch the power plug with wet hands. When removing
the power cord, ensure that you pull the plug and not the cord. Pulling the cord can damage it, which
can lead to fire or electric shock.
2.
Lift and carry the printer as shown in the illustration.
Note:
To find the weight for your printer configuration, see
CAUTIONS:
•
Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
The Xerox
damage to the printer caused by improper moving.
•
When moving the printer, do not tilt it more than 10 degrees to the front, back, left, or
right. Tilting the printer more than 10 degrees can cause toner spillage.
®
®
96
Xerox
Phaser
6022 Printer
User Guide
®
Warranty, Service Agreement, or Total Satisfaction Guarantee.
®
Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover
Physical Specifications
on page 119.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
