Adjusting The Focus; Inserting & Removing The Battery - FLIR ThermaCAM B2 User Manual

8 – Tutorials
10396303;a3
Figure 8.2 Removing a lens
Step
1
2
8.7.2
➲ Please note what is the locking ring and what is the focus ring in figure 8.1 on page
65. Trying to adjust the focus by rotating the locking ring will remove the lens.
8
Step
1
8.7.3
➲ The camera is shipped with charged batteries. To increase the battery life, the
battery should be fully discharged and charged a couple of times. You can do this
by using the camera until the battery is fully depleted.
66
Action
Rotate the locking ring on the camera 30° counter-clock-wise until the index mark
is lined up with the laser window.
Carefully pull out the lens. Do not use excessive force.

Adjusting the focus

Action
To adjust the focus, rotate the focus ring clock-wise or counter-clock-wise.
Inserting & removing the battery
Publ. No. 1557882 Rev. a156 – ENGLISH (EN) – February 28, 2006