Inserting The Battery; Removing The Battery - FLIR ThermaCAM B2 User Manual

8.7.3.1

Inserting the battery

10396403;a2
Figure 8.3 Inserting the battery
Step Action
1 Remove lid of the battery compartment by pressing the locking mechanism.
2 Insert the battery with the connectors facing the rear end of the camera and the
arrow symbol facing the front end of the camera.
3 Replace the lid of the battery compartment.
8.7.3.2

Removing the battery

10396503;a2
Figure 8.4 Removing the battery
Step Action
1 Remove the lid of the battery compartment by pressing the locking mechanism.
2 Remove the battery by firmly grabbing its rear end and carefully lifting it out from
the battery compartment.
3 Replace the lid of the battery compartment.
Publ. No. 1557882 Rev. a156 – ENGLISH (EN) – February 28, 2006
8 – Tutorials
8
67