FLIR ThermaCAM B2 User Manual page 88

9 – Camera overview
Button
Trigger
9
74
Comments
Pull the trigger to do one of the following:
Save the image
■
Switch on or switch off the Laser LocatIR
■
Autoadjust the camera
■
Update ref. temp
■
The function of the trigger depends on the trigger settings in the
Settings dialog box. For more information about trigger settings,
see section 10.4.8.1 – Settings on page 85
Publ. No. 1557882 Rev. a156 – ENGLISH (EN) – February 28, 2006