Procedure; Changing Image Mode; General - FLIR EX series User Manual

Hide thumbs Also See for EX series:

Table of Contents

Operation

7.12.3 Procedure

Follow this procedure:

1. Push the center of the navigation pad. This displays a toolbar.

2. On the toolbar, select Color

3. On the toolbar, select the type of alarm:

• Below alarm

• Above alarm

4. Push the center of the navigation pad. The threshold temperature is displayed at the

bottom of the screen.

5. To change the threshold temperature, push the navigation pad up/down.

The camera can operate in five different image modes:

• Thermal MSX (Multi Spectral Dynamic Imaging): The camera displays an infrared im-

age where the edges of the objects are enhanced.

• Thermal: The camera displays a fully thermal image.

• Picture-in-picture: The camera displays a digital camera image with a superimposed

infrared image frame.

• Thermal blending: The camera displays a blended image that uses a mix of infrared

pixels and digital photo pixels. The mixing level can be adjusted.

#T559828; r.18043/22369; en-US

. This displays a toolbar.

Table of Contents