Procedure; Changing The Temperature Scale Mode; General - FLIR EX series User Manual

Hide thumbs Also See for EX series:

Table of Contents

Operation

• Digital camera: The camera displays a digital camera image.

To display a good fusion image (Thermal MSX, Picture-in-picture, and Thermal blending

modes), the camera must make adjustments to compensate for the small difference in

position between the digital camera lens and the infrared lens. To adjust the image accu-

rately, the camera requires the alignment distance (i.e., the distance to the object).

7.13.2 Procedure

Follow this procedure:

1. Push the center of the navigation pad. This displays a toolbar.

2. On the toolbar, select Image mode

3. On the toolbar, select one of the following:

• Thermal MSX

• Thermal

• Picture-in-picture

• Thermal blending

level.

• Digital camera

4. If you have selected the Thermal MSX, Picture-in-picture, or Thermal blending mode,

also set the distance to the object by doing the following:

• On the Image mode toolbar, select Alignment distance

box.

• In the dialog box, select the distance to the object.

The camera can, depending on the camera model, operate in different temperature scale

modes:

• Auto mode: In this mode, the camera is continuously auto-adjusted for the best image

brightness and contrast.

• Lock mode: In this mode, the camera locks the temperature span and the temperature

level.

#T559828; r.18043/22369; en-US

. This displays a toolbar.

. This displays a dialog box where you can select the mixing

. This displays a dialog

Table of Contents