Pressure Roller Replacement - Xerox 5915 Service Manual

8.2.3 Pressure Roller Replacement

Removal
1. WARNIN: Power off the machine and
disconnect the power cord.
WARNING
Fuser surfaces are hot, allow the fuser to cool
down before attempting service procedure.
Fuser lubricant can cause discomfort to eyes.
Do not allow fuser lubricant to touch eyes.
2. Open the Front Cover and then the machine.
3. Remove the Heat
Roller......................(8.2.2)
4. (Fig.1):Remove the Pressure Roller Finger
Assy.
. Remove Screw (2).
. Remove the Pressure Roller Finger Assy.
(Fig. 1)
5. (Fig.2):Remove the Pressure Roller.
. Remove the Pressure Roller Finger Assy.
(Fig.2)
4-31
Section 4 Disassembly/Assembly/Adjustment
8. Fuser