Seat - Removal And Installation; 1996-On Tdm Models; 1991 To 1995 Tdm Models; Trx Models - Yamaha TDM850 User Manual

8*2 Bodywork
2.2 Turn the key to release the latch
2 Seat-
removal and installation

1991 to 1995 TDM models

1 Pull the sides of the seat away from the fuel
tank to release the Velcro fastener or the pegs
from the grommets.
2 Insert the ignition key into the seat lock
located behind the rider's seat, and turn it
clockwise to unlock the seat (see illustration).
Remove the seat, noting how it fits.
3 Installation is the reverse of removal. Make
sure the tab at the front of the seat locates
correctly under the tank bracket. Make sure the
Velcro fastens or the pegs locate correctly in their
rubber grommets (see illustration). Push down
on the rear of the seat to engage the latch.

1996-on TDM models

4 Insert the ignition key into the seat lock
2.7 Pull back the latch to release the rider's seat
2.3 Make sure the seat locates correctly against the tank ■
located behind the rider's seat, and turn it
clockwise to unlock the seat. Remove the seat,
noting how it fits.
5 Installation is the reverse of removal. Make
sure the tabs at the front of the seat locate
correctly under and on the back of the tank.
Push down on the rear of the seat to engage
the latch.

TRX models

6 Insert the ignition key into the seat lock
located below the side cover on the left-hand
side, and turn it clockwise to unlock the
passenger seat (see illustration). Remove the
seat, noting how it fits.
7 Pull back the latch at the back of the rider's
seat and remove the seat, noting how it fits (see
illustration).
8 Installation is the reverse of removal. Make
sure the tabs at the front of the rider's seat locate
correctly under the tank bracket, then push down
on the back of the seat to engage the latch.
Make sure the hooks on the front of the
passenger seat locate correctly under the
2.10 Unscrew the bolt on each side (arrow) and remove the seat
type (arrowed)
hooks, then push down on the rear of the seat to
engage the latch.
XTZ models
9 Remove the side covers (see Section 3).
10 Unscrew the bolt securing each side of
the seat and remove the seat, noting how it
fits (see illustration).
2.6 Turn the key in the lock (arrowed) and
remove the passenger seat
peg-
Staned by Stalker