Brake Pads - Replacement - Yamaha TDM850 User Manual

2.1a Remove the pad cover...
2.1c ... and withdraw the pad pins

2 Brake pads - replacement

A
Warning: The dust created by the
brake system may
asbestos, which is harmful to
2.2a Slacken the pad retaining pins (A), then unscrew the caliper
mounting bolts (B)...
2.1 d Remove the pad spring ...
your health. Never blow it out with
^
compressed air and don't inhale any of it. An
approved filtering mask should be worn when
working on the brakes.
1 On TDM and TRX models, where fitted,
remove the pad cover from the top of the caliper
(see illustration). Remove the pad pin retaining
contain
clips, then withdraw the pad pins from the
caliper, noting how they locate
Brakes, wheels and tyres 7»3
2.1b ... then remove the retaining clips .
2.1 e ... and lift out the pads
against the pad spring (see illustrations).
Remove the spring, noting how it fits, then lift out
the pads (see illustrations). Where fitted,
remove the shims from the back of the pads,
noting how they fit.
2 On XTZ models, slacken the pad retaining
pins, then unscrew the caliper mounting bolts
and slide the caliper
illustrations). Unscrew the pad retaining pins
2.2b ... and slide the caliper off the disc
off the disc (see
Scaned by Stalker