Rear Brake Fluid Level - Yamaha TDM850 User Manual

7
On TDM models, the rear brake fluid level is visible by looking up under
the seat from the left-hand side of the rear wheel - it must be above
LOWER level line (arrowed).
9 On XTZ models, remove the right-hand side cover (see Chapter 8) - the
rear brake fluid level is visible through the reservoir body - it must be
above LOWER level line (arrowed).
1 4 Top up with new clean hydraulic fluid of the recommended
the level is above the lower mark. Take care to avoid
above).
Daily (pre-ride) checks

Rear brake fluid level

8
On TRX models, the rear brake fluid level is visible through the
reservoir body - it must be above LOWER level line (arrowed).
1 f\ If topping up is required, on TDM models remove the seat and \J on
TRX models remove the side covers (see Chapter 8). On TRX and XTZ
models, remove the cap clamp, then on TRX models support the reservoir
or refit the screw. Unscrew the reservoir cap (arrowed) and remove the
-4 O I type, until Ensure that the diaphragm is correctly seated before installing the
I ^ spills (see Warning plate and cap. Tighten the cap securely. On TRX and XTZ models,
fit the cap clamp.
0«13
plate and diaphragm.
toned by Stalker