Fit The No-Bark Collar Unit On Your Dog's Neck - Motorola BARK200U User Manual

2.3

Fit the No-Bark Collar Unit on your Dog's Neck

IMPORTANT
For effective and reliable operation of the No-Bark Collar, the No-Bark Collar
Unit must be properly placed and fitted on your dog's neck.
1. Make sure that the No-Bark Collar Unit is powered
off. Press and hold the POWER KEY
it off.
2. Have your dog stand in a balanced position on a flat,
even surface.
3. Put the strap over your dog's neck, centering the
No-Bark Collar Unit underneath its neck and
making sure that the Motorola logo is upright facing
you.
4. String the end of the strap through the strap buckle.
5. Pull the end of the strap until the desired level of
tightness is reached and push the retainer bar
through the nearest strap hole, then insert the strap
through the remaining strap buckle to secure it.
6. Check to ensure that the No-Bark Collar Unit is in the center underneath
the neck of your dog.
7. Check the fit again after your dog has worn the No-Bark Collar Unit for
several minutes or as your dog gets more comfortable with it.
Getting Started
to power
9