Safety Instructions - Motorola BARK200U User Manual

1. Safety Instructions

WARNING:
As with any electrical device, supervision of your pet's usage should be
exercised until your pet is acclimated to the product.
If your pet is prone to chewing, we strongly recommend you keep this and
all other electrical devices out of its reach. This collar should not be worn
by your pet for more than 12 hours a day.
WARNING
The No-Bark Collar is suitable for use on healthy, non-aggressive dogs to control
excessive barking when used as described in this User's Guide. Therefore, always
read the instructions in this User's Guide carefully before using the product.
• DO NOT USE ON AGGRESSIVE DOGS - This product is not for use on
aggressive dogs. If you are not sure if this product is suitable for your dog, please
consult a certified trainer or your veterinarian.
• This product is not a substitute for responsible supervision of your dog.
• This product should only be used with dogs that are over 6 months of age.
• Do not leave the unit unattended as your dog may chew on it and the product
can get damaged.
• Other dogs within the hearing range may be affected by the ultrasonic sound.
• Many dogs will bark while playing with people or other dogs. Power off and
remove the No-Bark Collar Unit before playing with your dog to avoid the unit
from releasing ultrasonic correction.
• Power off the unit when it is not in use.
• Test this product and all its functions so that you are familiar with it prior to actual
use.
• Only use a battery of the same type. This product uses a replaceable battery
(CR2450).
• Keep this User's Guide for future reference.
CAUTION
There is danger of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to their instructions.
6 Safety Instructions