Table of Contents
Advertisement
2.8
Fit the Pet Collar Unit on your Dog's Neck
IMPORTANT
For effective and reliable operation of your Wireless Fence Pet Training
System, the Pet Collar Unit must be properly placed and fitted on your dog's
neck with suitable Collar Contacts that are long enough to touch the dog's
skin on the underside of its neck (not its hair).
1. Make sure that the Pet Collar Unit is powered off
(see "Powering On/Off the Pet Collar Unit" on
page 22).
2. Have your dog stand in a balanced position on a flat,
even surface.
3. Put the strap over your dog's neck, centering the
Pet Collar Unit underneath its neck and making
sure that the Motorola logo is upright facing you.
4. String the end of the strap through the strap buckle.
5. Pull the end of the strap until the desired level of
tightness is reached and push the retainer bar
through the nearest strap hole.
6. Check to ensure that the Pet Collar Unit is in the
center underneath the neck of your dog.
7. Check the fit again after your dog has worn the Pet Collar Unit for several
minutes or as your dog gets more comfortable with it.
NOTE
The Pet Collar Unit should fit snugly on your dog's neck so that you can only fit
18
Getting Started
Advertisement
Table of Contents
