Getting Started; Attach The Adjustable Strap To The No-Bark Collar Unit; Insert And Remove Battery On The No-Bark Collar Unit - Motorola BARK200U User Manual

2. Getting Started

2.1

Attach the Adjustable Strap to the No-Bark Collar Unit

1. With the front side of the buckle facing up, thread the strap through Slot 1,
moving it upwards towards Slot 2.
2. Continue to thread through Slot 2 horizontally and then move downwards
towards Slot 3.
Slot 3
3. Continue to thread through Slot 3.
2.2

Insert and Remove Battery on the No-Bark Collar Unit

The No-Bark Collar Unit uses a replaceable battery (CR2450).
1. Turn the battery compartment cover to the unlock position
above to release and remove the cover.
2. Place the battery with negative pole (-) facing upwards in the
compartment.
Getting Started
Slot 2
Slot 1
Unlock
as shown
7