Using The No-Bark Collar; Powering On/Off The No-Bark Collar Unit; Adjust Correction Level - Motorola BARK200U User Manual

3. Using the No-Bark Collar

3.1

Powering On/Off the No-Bark Collar Unit

Press and hold the POWER KEY
on or off.
The unit will vibrate once to confirm ON and TWICE to confirm OFF.
NOTE
After powering off the No-Bark Collar Unit, the smart system retains the last
programmed correction level that your dog responded to.
3.2

Adjust Correction Level

Your No-Bark Collar is a smart bark detection device. If there is a bark from your
dog, it releases an ultrasonic sound to discourage or stop your dog from barking
(see ""Free" Bark Duration" on page 12).
Level What it does....
1 Releases audible tone only.
2 Releases ultrasonic sound for 1 second.
3 Releases ultrasonic sound for 3 seconds.
The Indicator LED flashes quickly in green and red when releasing ultrasonic sound.
1. Press and hold the ULTRASONIC KEY
3 seconds.
2. Short press the ULTRASONIC KEY
(from 1 to 3 in cyclic order).
The Indicator LED flashes in the following order to indicate the level of
correction:
Level Indicator LED
1 Flashes in Green
2 Flashes in Amber
3 Flashes in Red
3. Press and hold the ULTRASONIC KEY
confirm the level that you have selected on step 2 above.
Using the No-Bark Collar
on the No-Bark Collar Unit to power it
on the No-Bark Collar Unit for
to adjust the level of correction
for another 3 seconds to
11