Fit The No-Bark Collar Unit On Your Dog's Neck; Battery Life - Motorola scoutbark100 User Manual

No-bark
Hide thumbs Also See for scoutbark100:
Table of Contents

Advertisement

3. Close the battery compartment cover and gently tighten the screw in a
clockwise direction using a small cross-head or flat end screwdriver.

Battery Life

The average battery life is up to 3 months, depending on how often your dog
barks. The Indicator LED lights up in red when battery is low. To conserve
battery life, press the POWER KEY
it is not in use.
2.3

Fit the No-Bark Collar Unit on your Dog's Neck

IMPORTANT
For effective and reliable operation, the Collar Unit must be properly placed
and fitted on your dog's neck with suitable Collar Contacts that are long
enough to touch the dog's skin on the underside of its neck (not its hair).
1. Make sure that the Collar Unit is powered off. Press
the POWER KEY
2. Have your dog stand in a balanced position on a flat,
even surface.
3. Put the strap over your dog's neck, centering the
Collar Unit underneath its neck and making sure
that the Motorola logo is upright facing you.
4. String the end of the strap through the strap buckle.
5. Pull the end of the strap until the desired level of
tightness is reached and push the retainer bar
through the nearest strap hole and insert the strap
through the remaining strap buckle to secure it.
8
once to power off the Collar Unit when
once to power it off.
Negative pole (-) of the
CR2450 battery should
be facing upwards.
Getting Started

Advertisement

Table of Contents
loading

Table of Contents