Table of Contents
Advertisement
Fuel tank breather/overflow
hose
2
1
1. Fuel tank breather/overflow hose
2. Clamp
TIP
For California: See page 7-10 for
breather hose information.
Before operating the motorcycle:
●
Check the fuel tank breather/over-
flow hose connection.
●
Check the fuel tank breather/over-
flow hose for cracks or damage,
and replace it if necessary.
●
Make sure that the end of the fuel
tank breather/overflow hose is not
blocked, and clean it if necessary.
INSTRUMENT AND CONTROL FUNCTIONS
●
EAU48791
Make sure that the fuel tank
breather/overflow hose is routed
through the clamp.
Catalytic converter
This model is equipped with a catalytic
converter in the exhaust system.
The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:
4-13
WARNING
●
Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
●
Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
●
Make sure that the exhaust sys-
tem has cooled down before do-
ing any maintenance work.
●
Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
EAU13433
EWA10862
4
Advertisement
Table of Contents
Troubleshooting
