Table of Contents
Advertisement
General Information
ATV Identification
Numbers
The Arctic Cat ATV has two
identification numbers: Vehicle
Identification Number (VIN)
and
Engine
Serial
Number
(ESN).
The VIN is located on the lower-
front crossmember.
The ESN is located on the rear of
the engine crankcase and is visible
from the side.
These numbers are required by
the dealer to complete warranty
claims properly. No warranty
will be allowed by Arctic Cat if
the VIN or ESN is removed or
mutilated in any way.
Always provide the ATV name,
Vehicle Identification Number, and Engine Serial Number when con-
tacting an authorized Arctic Cat ATV dealer for parts, service, acces-
sories, or warranty. If a complete engine must be replaced, ask the
dealer to notify Arctic Cat for correct registration information.
Ignition Switch Key
Two keys come with the ATV. Keep the
spare key in a safe place. An identify-
ing number is stamped on each key.
Use this number when ordering a
replacement key.
Control Locations and Functions
Ignition Switch
The ignition switch has three positions.
OFF position — All electrical circuits
except the accessory plug are off. The
engine will not start. The key can be
removed in this position.
NOTE: The accessory plug is
powered by the battery at all times.
KC0055A
ON position — The ignition circuit is complete and the engine can
run. The key cannot be removed in this position.
LIGHTS position — The ignition circuit is complete and the running
lights and taillights are on. The key cannot be removed in this posi-
tion.
Leaving the ignition switch in the ON or LIGHTS position for a
long period of time when the engine is not running may
cause the battery to discharge. Always leave the ignition
KC0055A
switch in the OFF position when engine is not running.
Shift Lever
This ATV has a dual-range
automatic transmission with
reverse.
ATV-0055
CAUTION
ATV-0056
KC366A
37
Advertisement
Table of Contents
