Loading Paper And Specialty Media; Setting The Paper Size And Type; Configuring Universal Paper Settings; Loading Trays - Lexmark MX517 User Manual

Loading paper and specialty media

Loading paper and specialty media
The selection and handling of paper and specialty media can affect how reliably documents print. For more
information, see "Avoiding jams" on page 221

Setting the paper size and type

From the home screen navigate to:
> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >
Configuring Universal paper settings
The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the
printer menus.
Notes:
•
The smallest supported Universal size is 76.2 x 76.2 mm (3 x 3 inches).
•
The largest supported Universal size is 215.9 x 359.92 mm (8.5 x 14.17 inches).
1
From the home screen, navigate to:
> Paper Menu > Universal Setup > Units of Measure > select the unit of measure >
2
Touch Portrait Width or Portrait Height.
3
Select the width or height, and then touch

Loading trays

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1
Pull out the tray completely.
Note: Do not remove trays while a job prints or while Busy appears on the printer display. Doing so may
cause a jam.
and "Storing paper" on page
.
70.
53