Pan/Tilt Angle
Range
Display
Intimidator™ Spot 355Z IRC User Manual Rev. 1
You are able to select the range for the pan and tilt angles on the Intimidator™ Spot
355Z IRC to achieve the effect you like.
To select which pan angle range to use, do the following.
1.
Press <MODE/ESC>.
2.
Use <UP> or <DOWN> to choose Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Pan Angle.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select 540, 360, or 180.
7.
Press <ENTER>.
To select which tilt angle range to use, do the following.
1.
Press <MODE/ESC>.
2.
Use <UP> or <DOWN> to choose Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Tilt Angle.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select 270, 180, or 090.
7.
Press <ENTER>.
You are able to flip the LED display for easy readability in any mounting situation.
To select your display angle:
1.
Press <MODE/ESC>.
2.
Use <UP> or <DOWN> to choose Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Screen Reverse.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select ON or OFF.
7.
Press <ENTER>.
Page 19 of 27