Configuration (Standalone); Sound-Active Mode; Sound Sensitivity; Automatic Mode - Chauvet Intimidator SPOT 355Z IRC User Manual

Configuration
(Standalone)
Sound-Active
Mode

Sound Sensitivity

Automatic Mode

Manual Pan/Tilt
Operation
Page 18 of 27
Set the product in one of the standalone modes to control without a DMX controller.
·
Connect the product to power.
Never connect a product that is operating in any standalone mode (either
Automatic or Sound-Active) to a DMX string connected to a DMX controller.
Products in standalone mode may transmit DMX signals that could interfere with
the DMX signals from the controller.
To enable the Sound-Active mode, do the following.
1. Press <MODE/ESC>
2. Use <UP> or <DOWN> to choose Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Sound.
5. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
To set the sound sensitivity, do the following.
1. Press <MODE/ESC>
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Sensitivity.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select 001–100, low to high.
7. Press <ENTER>.
To enable the Automatic mode:
1. Press <MODE/ESC>
2. Use <UP> or <DOWN> to choose Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Auto.
5. Press <ENTER>.
To select whether you want the Intimidator™ Spot 355Z IRC to operate with normal
panning or inverted panning, do the following.
1. Press <MODE/ESC>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pan Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
7. Press <ENTER>.
To select whether you want the Intimidator™ Spot 355Z IRC to operate with normal
tilting or inverted tilting, do the following:
1. Press <MODE/ESC>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Tilt Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
7. Press <ENTER>.
Intimidator™ Spot 355Z IRC User Manual Rev. 1