Manual Test Mode; Pan/Tilt Orientation; Pan/Tilt Angle Range - Chauvet Intimidator Spot 355 IRC User Manual

Manual Test Mode

Pan/Tilt
Orientation
Pan/Tilt Angle
Range
Page 16 of 25
To test or control any function of the Intimidator Spot 355 IRC through the LCD display
menu, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Manual.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select the function to test or control, from the options:
Pan, Pan Fine, Tilt, Tilt Fine, P/T Speed, Color, Gobo, Gobo Rotate, Prism,
Focus, Dimmer, Shutter, Special Function, and P/T Macros.
7. Press <ENTER>.
8. Use <UP> or <DOWN> to change the value of the selected function, from 000
NOTE: For information regarding what each value range does for each
function, see the DMX Assignments for 14CH
To select whether the Intimidator Spot 355 IRC will operate with normal panning or
inverted panning, do the following.
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pan Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
7. Press <ENTER>.
To select whether the Intimidator Spot 355 IRC will operate with normal tilting or inverted
tilting, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Tilt Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
7. Press <ENTER>.
The user can select the range for the pan and tilt angles on the Intimidator Spot 355
IRC.
To select which pan angle range to use, do the following.
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pan Angle.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select 540, 360, or 180.
7. Press <ENTER>.
To select which tilt angle range to use, do the following.
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Tilt Angle.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select 270, 180, or 090.
7. Press <ENTER>.
Mode.
Intimidator Spot 355 IRC User Manual Rev. 1
–255.