Setup; Pan Reverse; Tilt Reverse; Pan Angle - Chauvet Rogue R2 Wash User Manual

Setup

Pan Reverse

Tilt Reverse

Pan Angle

Tilt Angle

Display

Screen Reverse

Dimmer Curve

Dimmer Speed

Color Calibration

Factory calibration This option chooses to set the color temperature calibration to Off or On. When RGBW
Custom Calibration Choosing Custom allows manual calibration of the RGBW DMX Channels.
Rogue™ R2 Wash User Manual Rev. 1
This programming level controls the product's head movement, display, dimming, and fan
adjustments.
·
Starting from the Main Level screen, select Setup, press <ENTER>.
Reverses the operation of the pan attribute.
1. Highlight Pan Reverse, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Reverses the operation of the tilt attribute.
1. Highlight Tilt Reverse, press <ENTER>.
2. Select YES or NO, press <ENTER>.
This option assigns pan range.
1. Highlight Pan Angle, press <ENTER>.
2. Select 540, 360, or 180, press <ENTER>.
This option assigns tilt range.
1. Highlight Tilt Angle, press <ENTER>.
2. Select 90, 180, or 230, press <ENTER>.
This option allows you to choose a fan mode. AUTO mode controls the fan speed based

Fans

on the temperature of the LED's. In ECO mode, fans will stay as quiet as possible and
allow the output of the LEDs to decrease by about 20% over time depending on the
ambient temperature. As the ambient temperature increases, the output of the LEDs will
decrease. In Full mode, the fans are on all the time at the highest speed.
1. Highlight Fans, press <ENTER>.
2. Select Auto, ECO, or Full, press <ENTER>.
Determines whether or not the backlight of the display will stay on after last command
button pressed.
1. Highlight Display, press <ENTER>.
2. Select OFF or ON, press <ENTER>.
To invert the control panel screen:
1. Highlight Screen Rev, press <ENTER>.
2. Select YES or NO, press <ENTER>.
This option allows you to choose a dimmer curve mode. Linear mode follows the speed
of the user controlling the fader when it is brought down to a "0" value. In Square mode
the dimmer follows a square dimming curve when the fader is brought to a "0" value. In
I Square mode the dimmer follows a square dimming curve in reverse when the fader is
brought to a "0" value. In SCurve mode, the dimmer follows a square dimming curve
when the fader is brought to a "0" value.
1. Highlight Dimming Curve, press <ENTER>.
2. Select Linear, Square, I Square, or SCurve, press <ENTER>.
This option sets the speed of the Dimmer Curve menu option .
1. Highlight Dimmer Speed, press <ENTER>.
2. Select Smooth or Fast, press <ENTER>.
This programming level allows the user to set what each of the RGBW DMX channels do
when set to a "255" value.
·
Starting from the Setup screen level, select Color calibration, press <ENTER>.
DMX channels are at full, setting to Off sets the fader to Max. output on each of the
RGBW DMX Channels or to On which uses the factory calibrated color temperature.
·
Highlight On or Off, press <ENTER>.
1. Highlight Custom, press <ENTER>.
2. Select RED, GREEN, or BLUE, press <ENTER>.
3. Set the color value (100–255), press <ENTER>.
4. Repeat step 2 for the other colors.
Operation
-13-