Pan Angle; Tilt Angle; Pan And Tilt Blackout; Color Movement Blackout - Chauvet Rogue R3 Spot User Manual

O
PERATION

Pan Angle

This option assigns pan range.
1. Highlight Pan Angle, press <ENTER>.
2. Select 540, 360, or 180, press <ENTER>.

Tilt Angle

This option assigns tilt range.
1. Highlight Tilt Angle, press <ENTER>.
2. Select 90, 180, or 250, press <ENTER>.

Pan and Tilt Blackout

This option assigns engages the shutter to block all light output whenever the product's head is in
movement.
1. Highlight BL.O.P/T Move, press <ENTER>.
2. Select Yes or No, press <ENTER>.

Color Movement Blackout

This option engages the shutter to block all light output whenever the product's color wheel is in motion.
1. Highlight BL.O.ColorMove, press <ENTER>.
2. Select YES or NO, press <ENTER>.

Gobo Movement Blackout

This option engages the shutter to block all light output whenever the product's gobo wheel is in motion.
1. Highlight BL.O.GoboMove, press <ENTER>.
2. Select YES or NO, press <ENTER>.

Pulse Width Modulation

To set the PWM frequency, follow the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select PWM Option, or touch the display where it says PWM Option.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select the PWM frequency, from 600Hz, 1200Hz,
2000Hz, 4000Hz, 6000Hz, or 15000Hz, or touch the display where it says the desired option.
5. Press <ENTER>.

Fans

This option allows you to choose a fan mode. AUTO mode controls the fan speed based on the
temperature of the LED's. In ECO mode, fans will stay as quiet as possible and allow the output of the
LEDs to decrease by about 20% over time depending on the ambient temperature. As the ambient
temperature increases, the output of the LEDs will decrease.
1. Highlight Fans, press <ENTER>.
2. Select Auto or ECO, press <ENTER>.

Reset Function

This programming level allows the user to reset individual functions to the home position.
• Starting from the Setup screen level, select Reset Function, press <ENTER>.
Pan/Tilt Reset
This option resets the Pan/Tilt functions to the home position.
1. Highlight Pan/Tilt, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Prism Reset
This option resets the Prism functions to the home position.
1. Highlight Prism, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Color/Frost Reset
This option resets the Color/Frost functions to the home position.
1. Highlight Color/Frost, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Rogue R3 Spot User Manual Rev. 1
menu.
Page 14 of 27