Configuration (Standalone); Sound-Active Mode; Automatic Mode; Manual Reverse Tilt Operation - Chauvet Intimidator Wave IRC User Manual

Configuration
(Standalone)
Sound-Active
Mode

Automatic Mode

Manual Reverse
Tilt Operation
Manual Tilt Angle
Range
Intimidator™ Wave IRC User Manual Rev. 1
Set the product in one of the standalone modes to control it without a DMX controller.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode (Static,
Automatic, or Sound-Active) to a DMX string connected to a DMX controller.
Products in standalone mode may transmit DMX signals that could interfere with
the DMX signals from the controller.
To enable the Sound-Active mode, do the following:
1. Press <MENU> and use the <UP> or <DOWN> buttons to select Run Mode.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Sound.
4. Press <ENTER> and Sound (M-1, M-2 or M-4) shows on the display.
The product will only respond to low frequencies of music (bass and drums).
To enable the Automatic mode, do the following:
1. Press <MENU> and use the <UP> or <DOWN> buttons to select Run Mode.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Auto and press <ENTER>.
4. Use <UP> or <DOWN> to scroll through the auto programs (1–16) and press
<ENTER> to make your selection.
Auto Program Sweep Angle
1 180°
2 90° Front
3 180°
4 45° Front
5 90° Up
6 45° Back
7 90° Back
8 90° Front
9
180°
10 45° Front
11 90° Up
12 90° Back
13
90° Back
14 90° Front
15 180°
16 45° Front
To select whether you want the Intimidator™ Wave IRC to operate with normal tilt or
inverted (reverse) tilt, do the following.
1. Press <MENU> and use the <UP> or <DOWN> buttons to select Setup.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Tilt Reverse and press <ENTER>.
4. Use <UP> or <DOWN> to select ON or OFF and press <ENTER>.
To select the range for the tilt angles on the Intimidator™ Wave IRC, do the following:
1. Press <MENU> and use the <UP> or <DOWN> buttons to select Setup.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Tilt Angle and press <ENTER>.
4. Use <UP> or <DOWN> to select 90 (90°), 180 (180°), or 270 (270°).
5. Press <ENTER>.
Color Movement
All Wave, alternate & synchronized
Chase Wave
Chase Wave
Chase Wave
Chase Wave
Chase Wave
Chase Wave
1 & 2 color scroll Synchronized
1 & 2 color scroll Synchronized
1 & 2 color scroll Synchronized
1 & 2 color scroll Synchronized
4 color scroll Synchronized
All Synchronized
1 color scroll Alternate
1 color scroll Alternate
1 & 2 color scroll Alternate
Page 27 of 32