Values:
Off*
Does not buffer print jobs to the hard disk.
On
Buffers print jobs to the hard disk.
Auto
Buffers print jobs only if the printer is busy processing data from another input port.
Note: Changing the Job Buffering menu item automatically resets the printer.
MAC Binary PS
Purpose:
To configure the printer to process Macintosh binary PostScript print jobs.
Values:
On
Printer processes raw binary PostScript print jobs from computers using the
Macintosh operating system.
This setting often causes Windows print jobs to fail.
Off
Printer filters PostScript print jobs using standard protocol.
Auto*
Printer processes print jobs from computers using either Windows or Macintosh
operating systems.
Serial Menu
Use the Serial Menu to change printer settings affecting jobs sent to the printer through a serial port
(Serial Opt <x>).
Select a menu item for more details:
Baud
Data Bits
Honor DSR
Job Buffering
NPA Mode
Parity
Note: Values marked by an asterisk (*) are the factory default settings.
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print job received
through the serial port requires it, regardless of the default printer language.
Using the printer menus
PCL SmartSwitch
PS SmartSwitch
Robust XON
Serial Buffer
Serial Protocol
258