Using Duplex Bind - Lexmark T630 User's Reference Manual

Using Duplex Bind

When you select duplex bind printing in the printer driver or Duplex Bind in the Finishing Settings in
the Local Printer Setup Utility, you must select either long edge or short edge binding, which are the
values for this setting. The purpose of Duplex Bind is to define the way duplexed pages are bound,
and how the printing on the back of the sheet (even-numbered pages) is oriented in relation to the
printing on the front (odd-numbered pages).
The two values for Duplex Bind are:
Long Edge* Assumes binding along the long end of the page (left edge for portrait
orientation and top edge for landscape orientation). The following
The asterisk (*)
illustration shows long-edge binding for portrait and landscape pages:
indicates this is
the factory
default setting
Short Edge Assumes binding along the short edge of the page (top edge for portrait
orientation and left edge for landscape orientation). The following
illustration shows short-edge binding for portrait and landscape pages:
Using the duplex function
Binding
Back of Front of
sheet next sheet
Portrait
Back of
sheet
Binding
Back of
sheet
Front of
next sheet
Back of sheet
Binding
Front of next
sheet
Binding
Front of
next sheet
Landscape
77